IH1200 Personal Monitoring System

IH1200 Flow Restrictor

Flow Restrictors for IH1200 Personal Monitoring System

Sampling Belt

MiniCan Sampling Belt

Sampling Holster

MINICAN HOLSTER for IH1200. Does not include Belt

IH1200 Silonite Inlet Line

IH1200 Silonite Inlet Line
IH1200 Inlet tubing, 32"Length, 1/32" Deact. Silonite with 1/16 x 0.04"IDTeflon Sleeve. With retaining ferrule and safety clip.

SILONITE INLET FILTER

IH1200 Silonite Coated Inlet Filter.
Use gloves when installing onto inlet line to avoid oil contamination

Insufficient stock

Insufficient stock

Register to request quotes or place orders

The IH1200 Personal Monitors utilize classical vacuum sampling into MiniCansTM and Bottle-VacsTM to perform STEL or TWA monitoring for up to 12 hours.

Description Part No. Unit
Personal Monitoring Flow Controller IH1200QTx EA
Female Micro-QTTM Valve 30-22800 EA
Sampling Belt 39-35000 EA
Sampling Holster 39-35010 EA
Silonite® Inlet Line (w/Teflon® Sleeve) 39-36020 EA
Silonite® Inlet Filter 39-36050 EA

Product Description

The IH1200 Personal Monitors utilize classical vacuum sampling into MiniCansTM and Bottle-VacsTM to perform STEL or TWA monitoring for up to 12 hours. Like HDS Personal Monitors, sampling using the IH1200 eliminates the concentration and matrix effects associated with adsorbent-based sampling techniques. The IH1200 is universal, recovering all analytes in a single sampling event with no need to choose different media. Large flow rate adjustments are made by changing inlet restriction (see table below), while fine adjustments (2–3x) are made using a built in flow adjust feature. Enough sample is collected to allow multiple analyses in the laboratory, with detection limits down to low PPB if needed. The IH1200 meets the requirements of OSHA Method PV2120 for determination of workplace contaminants using MiniCanTM samplers. The sampling procedure is easy: Connect an evacuated MC450QT MiniCanTM or 500mL Bottle-VacTM  and sampling starts. Monitor the fill rate on the built-in gauge to document a constant fill rate during the sampling event; disconnect the canister to stop sampling.

Additional Information

Weight 1 lbs
Sampling Method

Helium Diffusion Sampling

IH1200 Flow Restrictor

Weight 1 lbs
Flow Range

0.5-1.5 cc/min, 2-6 cc/min, 20-60 cc/min, 50-150 cc/min, 7-21 cc/min

Sampling Belt

Weight 1 lbs

Sampling Holster

Weight 1 lbs

IH1200 Silonite Inlet Line

Weight 1 lbs

SILONITE INLET FILTER

Weight 1 lbs