New Levels of Automated Analysis
The 7650 brings the automated analysis of MiniCans™, Bottle-Vacs™, and even large volume sampling canisters to a whole new level. Drawing upon the benefits of its predecessors, the 7650 is the first canister autosampler to facilitate the analysis of up to twenty, 1 to 1.4L canisters while maintaining samples in a completely closed and isolated state until required for analysis. This level of isolation greatly reduces the potential for carryover, making the 7650 an ideal choice for today’s soil gas laboratories. All samples, standards, and blanks, ow through the same direct, inert flow path, eliminating any problematic background level variations – a well-known challenge with rotary valve based autosamplers.
The Ideal Autosampler
When paired with a 7200A Preconcentrator, the 7650 becomes an ideal autosampler solution for today’s laboratories that must routinely analyze both high and low concentration samples. The 7650 also includes an easily accessible, generous array of inlet expansion ports in banks of 9, for the analysis of up to 18 larger canisters or Tedlar® bags.
The 7650 also has the ability to deliver sample canisters to an oven for heating up to 150°C prior to analysis for the recovery of higher molecular weight compounds.
High or Low Level Analysis
High or Low Level Analysis
The 7650 Autosampler features stand-alone loop analysis, or pair with the 7200A Preconcentrator for trace analysis.
Extended Range Air Analysis
Extended Range Air Analysis
The 7200A | 7560 System features a wide volume range (0.25 to 1000cc) for increased dynamic range without dilution. Directly handle PPM level samples without carryover. Supports single canister calibrations.
Toxic Organics Valve™ Compatibility
Toxic Organics Valve™ Compatibility
Now, add MiniCan™ autosampling for your canisters that use the popular TOV™ and Nupro® valves by simply attaching a MicroValve™ to the top of the sampler valve prior to analysis.
Analyze up to 20, 1L MiniCans/Bottle-Vacs
Analyze up to 20, 1L MiniCans/Bottle-Vacs
The 7650 holds 1 – 1.4L canisters in two, 10-position trays with intersample isolation far beyond that of rotary valve autosamplers
Direct Intet Robotics
Direct Inlet Robotics
The 7650 features a single inlet with a Silonite-D® coated and heated transfer line for the best possible sample isolation and analytical accuracy.
Sample Heating
Sample Heating
The 7650 canister autosampler can preheat a canister for improved recovery of heavier VOCs.
Silonite–D® Coated Inlet Lines
Silonite–D® Coated Inlet Lines
The 7650 1⁄16” heated Inlet line inserts directly into a canister’s MicroValve™ for a zero dead volume, secure sample connection.
Two Modes of Operation
Two Modes of Operation
Connect directly to a GCMS for loop injection analysis of 0.05–1000 PPM level samples, or in combination with a 7200A Preconcentrator to extend sensitivity to the sub-PPB range
Product Applications
HDS™ MiniCan™ and Bottle-Vac™ Analysis
Ambient Air
Landfill Gas
Mold Microbial VOC detection
HDS™ Personal Monitor
Ambient Air with volatiles
7650-01 Canister Autosampler Brochure
The 7650-01 brings the automated analysis of MiniCans™, Bottle-Vacs™, and even large volume sampling canisters to a whole new level. Drawing upon the beneifts of its predecessors, the 7650-01 is the first canister autosampler to facilitate the analysis of up to twenty, 1–1.4L canisters while maintaining samples in a completely closed and isolated state until required for analysis. This level of isolation greatly reduces the potential for carryover, making
the 7650 an ideal choice for today’s soil gas laboratories.